Segway p Series Especificações descarregar pdf (Página 3)

20076-00001ac

Installation and Removal Instructions

Charging Your Battery Packs

In order to maintain the best performance from your Segway PT Battery Packs, fully charge your Battery Packs for at

least 12 hours, once a month, or once every 12 hours of operation — whichever comes ﬁrst. Make sure your Battery Packs

are within the speciﬁed charging temperature range when charging. Even if you do not intend to immediately use your

new Battery Packs, you should still charge them for at least 12 hours as soon as possible.

Install and remove the Battery Packs in a dry location only.

WARNING!

Remove Battery Packs

Tool Required: 3 mm hex wrench

1. Tip Segway PT onto its side so the outside of one of the

wheels lays ﬂat against a clean, smooth surface.

2. Use 3 mm hex wrench to remove fasteners (4 per

Battery Pack).

3. Pull Battery Packs straight off chassis.

Install Battery Packs

Tool Required: 3 mm hex wrench

1. Seat Battery Packs on chassis with curved edge facing

outside of chassis.

2. Secure Battery Packs to chassis with fasteners (4

per Battery Pack) and tighten with 3 mm hex wrench.

Torque fasteners to 1.6 N-m (14 in-lb).

NOTICE

: Do not cross thread or over tighten fasteners.

Tighten only to the prescribed torque. To avoid risk of

damage, do not use a power tool to thread in or tighten

fasteners. Use only Segway approved fasteners.

Be sure the Charge Port is dry before charging Battery Packs. Do not insert plug if Charge Port is wet.

WARNING!

1. Plug one end of the Power Cord (provided with your

Segway PT) into the Charge Port.

2. Plug the other end of the Power Cord into a grounded

AC outlet (100 V – 240 V; 50 Hz – 60 Hz). The Power

Cord should be properly grounded.

Unplug or disconnect your Segway PT from AC power before removing or installing Battery Packs or performing any

service. It is hazardous to work on any part of your Segway PT when it is plugged into AC power. You risk serious bodily

injury from electric shock as well as damage to your Segway PT.

1 2 3 4 5

Sem comentários

Segway p Series Especificações Página 3